Labconco CentriVap DNA Systems - Page 25

Chapter 6: Accessories for Your CentriVap
Product Service 1-800-522-7658
21
The following accessories are available for the CentriVap DNA Concentrator.
PART #
DESCRIPTION
7462900
7462901*
Rotor (DNA)
Holds (72) 0.5 ml microcentrifuge tubes
and
(60) 1.5 ml microcentrifuge tubes or
(60) 2.0 ml microcentrifuge tubes
7450700
7450701*
Rotor (1.5 ml)
Holds (132) 1.5 ml microcentrifuge tubes or
(132) 2.0 ml microcentrifuge tubes
7455000
7455001*
Rotor (15 ml)
Holds (44) 12 x 55 mm tubes or
(36) 12 x 75 mm tubes or
(36) 12 x 95 mm tubes or
(36) 13 x 75 mm tubes or
(36) 13 x 100 mm tubes
and
(24) 16 x 100 mm tubes or
(18) 16 x 120 mm conical tubes or
(18) 17 x 95 mm tubes or
(18) 17 x 100 mm centrifuge tubes or
(18) 17 x 120 mm tubes
7455100
7455101*
Rotor (12 mm)
Rotor (12-13 mm)
Holds (40) 1.5 ml microcentrifuge tubes or
(40) 2.0 ml microcentrifuge tubes
and
(16) 12 x 55 mm tubes or
(100) 12 x 75 mm tubes or
(64) 12 x 95 mm tubes or
(100) 13 x 75 mm tubes or
(64) 13 x 100 mm tubes
7455200
7455201*
Rotor (50 ml)
Holds (32) 1.5 ml microcentrifuge tubes or
(32) 2.0 ml microcentrifuge tubes
and
(12) 28 x 115 mm conical tubes or
(12) 28 x 135 mm conical tubes or
(12) 28 x 140 mm conical tubes
7461900
7461901*
Rotor (96 well plate)
Holds (4) Standard 96 well plates or
(2) Deep well 96 well plates
7460900
Clear Canister - Accommodates inserts listed below
7814800
Acid Trap Insert
7814900
Moisture Trap Insert
7815000
Radiochemical Trap Insert
7815200
Solvent Trap Insert
7456600
Glass Lid for Concentrator – Direct replacement for standard equipment
acrylic lid. For use with chemicals that could craze acrylic.
7464300
CentriZap Strobe Light – For observing samples while the rotor is spinning.
7995600
Ammonia Trap Insert
*PTFE Coated