13
MAINTENANCE PROGRAM
Maintenance program for swing door NEPTIS/LE:
Each 6 month:
! Attention- Before work on the operator cut main power line.
- Check that all securing screws are well tightened.
- Clean and lubricate moving and sliding components.
- Lubricate closing spring if present.
- Check wiring connections.
- Check that arm connection screw are well tightened.
- Check that door leaf are stable and the movement is steady, without friction from full
open to full close position.
- Check the condition of the hinges and lubricate it.
- Check that speeds, timing, and safety functions are well adjust.
- Check that safety and activation sensor are properly functioning.
!Attention-Any part that appear damaged or worn must be changed.
For spare parts see the spare part list.
To Next Page
Loading...
