Labrie expert 2000 Operator's Manual

33Expert(t) 2000
TM
Operator Manual
Figure 16. Mirror adjustment
Changing Driving
Position
Labrie recommends to drive the
Expert(t) 2000
TM
from the left-hand side
driving position all the time, except
when door-to-door collecting; where
you use the right-hand side driving
position due to the systematic
stop-and-go sequence.
There are several safety issues
involved when you change driving
positions and Labrie recommends the
following procedure.
To change driving positions:
1. Stop the vehicle and apply the
parking brake.
2. Turn off the
PUMP switch.
3. Turn off the engine.
4. Move to the desired driving
position (left or right).
5. Turn the
DRIVING POSITION control
switch to the desired position
(left or right).
Figure 17. Driving Position switch
6. Adjust the mirrors to ensure an
adequate view scope from the
selected driving position. For
more information, see Adjusting
Mirrors.
Note:When changing to the
right-hand side driving
Driving Position
switch

Labrie expert 2000 Specifications

General

Brand	Labrie
Model	expert 2000
Category	Utility Vehicle
Language	English