LaCie DJI COPILOT - 6 System Events

System Events
Power-saving mode
When not in use, DJI Copilot conserves energy by putting its processor into power-saving mode. The LCD
displays the following when DJI Copilot is entering power-saving mode:
The device wakes up when:
A mobile device is detected following a push on the action button
When an Easy copy is launched (Copilot BOSS detected an SD card or USB-connected device following
two pushes on the action button).
For more details, see Action Button Scanning and Easy Copy.
Manually iniate power-saving mode
When not in use, DJI Copilot automatically conserves energy by putting its processor into power-saving
mode. You can manually initiate power-saving mode by holding the action button down until DJI Copilot
goes to sleep.
Operaon in progress
The LCD displays the following when DJI Copilot is working on an operation or waking from power-saving
mode:
It can take up to 20 seconds to wake up the processor.

38DJI COPILOT
5/4/18