Rugged RAID User Manual 14
GETTING CONNECTED
Setting up the LaCie Rugged RAID is easy thanks to LaCie Setup Assistant. Follow the steps in the order they are
given to ensure that your LaCie Rugged RAID’s volume mounts correctly on your computer.
THUNDERBOLT AND WINDOWS
Important info: Thunderbolt technology is compatible with Windows 7 and Windows 8.
Windows requires a driver to use the Thunderbolt port. For the initial setup, connect the product to a host
computer via USB and run LaCie Setup Assistant (see Step 2 - Launch LaCie Setup Assistant). You can connect
via the Thunderbolt interface once LaCie Setup Assistant has successfully formatted your device and the
Thunderbolt driver is installed.
To Next Page
Loading...
