90037350rev01
- 24 -
5 • POSITIONING
• To access the connections, remove the
bottom right-hand side panel
A • Electrical power supply input
B • Cold water supply input
C • Gas supply input
D • Softened water supply input (up to a max.
temperature of 50°C)
E • Condensate and wash water drain
For models:
061-101-062-102-201-202
054-084-154
For models:
161 - 134
5.8 • The distances from other appliances or from
adjacent walls that must be left to allow
access for servicing operations will be found
on the installation diagram for the oven to
connect. In the event of the oven being
installed directly against an inflammable wall,
suitable heat insulation must be provided.
Current fire regulations should be
meticulously observed and respected. Do not
obstruct the openings and slots in the casing
as they disperse the heat in the electric
component compartment.
Keep strictly to the installation diagrams.
5.9 • Once the appliance is installed, the electrical
power cable must be protected, and never
stretched or tugged.
5.10 • The appliance must be level: any difference
in level or sloping of the supporting surface
should be eliminated. Differences in level or
sloping negatively affect oven operation.
5.11 • Danger of crushing during installation
Fingers, hands and feet can be crushed
by the appliance. Wear suitable protective
clothing during installation.
5 • TRANSPORT AND POSITIONING
A
A
B
B
C
C
D
D
E
E
E
To Next Page
Loading...
