90037350rev01
- 25 -
5 • TRANSPORT AND POSITIONING
5.12 • Remove all packing materials and peel away
the protective plastic film from all external
surfaces of the oven.
5.13 •
For free-standing models, the appliance needs
to be levelled: small differences in level of the
supporting surface can be eliminated with the
adjustable feet (by screwing or unscrewing
them). A significantly uneven or sloping stance
can affect the operation of the oven adversely.
For models equipped with a pan trolley,
it is necessary to pay special attention when
levelling.
5.14 • Lining up the pan trolleys. If the floor is
not level, aremedy must be found using an
access rampwith a maximum gradient of 4°
(not included inthe supply).
If there is an outlet grate in front of
theappliance, it is necessary to fit runners in
thepan trolley entry area.
OK
OK
201 - 202
X = 200 mm
Y = 300 mm
To Next Page
Loading...
