Landice Executive Trainer - Appendices; Appendix A: Medrail Installation

Appendix A: Medrail Installation
30
Insert the side rail into the upper
rail clamp and tighten the bolt
using a 1/2” socket.
(Do not over-tighten.)
Use a soft mallet to firmly set the
rails inside the clamp.
Use a 3/16” allen wrench to tighten
the rail clamp bolts.
(Return to Step 9 in Assembly
Instructions).
STEP 1 STEP 2
STEP 3
STEP 4
Fit the side rail to the bottom
rail clamp.