1
Chapter 1 Product Description On Page
1.1 General 2
1.2 Built 3
1.3 Scope of delivery 4
1.4 Holding serration of the clamping jaws 4
1.5 Version 4
1.6 Accessories 4
1.7 Service option 6
1.8 Compatibility 8
1.9 Prerequisite for mounting on a machine table 8
Chapter 2 Technical data
2.1 General data and tightening torques 9
2.2 Clamping pressure and clamping force 9
2.3 Zero point interface 9
Chapter 3 Installation
3.1 Attach the Makro•Grip
®
(FS) 5-Axis Vise to the machine table 10
Chapter 4 Operation
4.1 Clamping of workpieces in the holding serration 10
4.2 Dismantling and turning / inserting the clamping jaws 11
4.3 Regular inspection during operation 11
Chapter 5 Maintenance
5.1 Test work 12
5.2 Lubricant 12
5.3 Maintenance plan 12
5.4 Disassembly / assembly 12
5.5 Instructions for disassembling and assembling the 5-Axis Vise 12
5.6 Spare parts 13
Chapter 6 Malfunctions
6.1 Fault / error 13
Chapter 7 Warning
7.1 Intended use 14
7.2 Requirements for operating personnel 14
7.3 Personal protective equipment and personal safety 14
Chapter 8 Decommissioning
8.1 Disposal 14
Chapter 9 Explanation of Symbols
9.1 Symbols 15
To Next Page