Lanier 5222 - Printing a Document; Destination Tray; Duplex Printing

Printing a Document
PostScript3 Kit Type185 8 - 3
Printing a Document
This section describes how to print a document using printer specific functions.
Paper Source
The following table shows the tabs or menus where you can select this function.
Destination Tray
The following table shows the tabs or menus where you can select this function.
Duplex Printing
Use this function to select duplex printing.
The following table shows the tabs or menus where you can select this function.
Resolution
Use this function to set the resolution in dots per inch. The available options are 300dpi and
600dpi.
The following table shows the tabs or menus where you can select this function.
Windows 95/98 [Paper] tab
Windows NT 4.0 [Page Setup] tab
Windows 3.1x
[Paper]
tab
Macintosh
[General]
in the print dialog box
Windows 95/98
[
More Options
]
in the
[Paper]
tab
Windows NT 4.0 [Printer features] in
[Document Options]
in the
[Advanced]
tab
Windows 3.1x [Features
]
tab
Macintosh [Printer Specific Options] in the print dialog box
Windows 95/98 [More Options
]
in the
[
Paper] tab
Windows NT4.0
[
Page Setup] tab
Windows 3.1x [Features] tab
Macintosh
[
General
]
in the print dialog box
Windows 95/98 [Graphics
]
tab
Windows NT 4.0
[
Graphic
]
in the
[Advanced]
tab
Windows 3.1x
[
Features
]
tab
Macintosh [Printer Specific Options
]
in the print dialog box