Lanier 5222 - Windows NT

Printing a Document
PostScript3 Kit Type185 8 - 7
Windows NT 4.0
1
From an application, select the menu command to print.
•
The print dialog box appears.
2
Open the Printer Properties.
3
If you want to collate, select
[
Collate]
from the
[Page Setup]
tab.
4
Click the
[Advanced]
tab.
5
From
[Document Options
]
, select the function you want to use.
•
The current setting is displayed in the
[
Change settings
]
box in the lower part of the
tab.
6
Use the
[
Change settings]
box to select the appropriate setting.
7
Click
[Apply
]
to apply the settings you made.
8
After making all of the settings you want, click
[
OK
]
to close the Printer Properties.
9
Start printing from the application's print dialog box.
Windows 3.1x
1
From an application, select the menu command to print.
•
The print dialog box appears.
2
Open the Printer Setting dialog box.
3
Click the
[Features]
tab.
4
In the
[Features]
box, the available functions are displayed. Use the
[
Selection
]
list to
select the appropriate setting.
5
After making all of the settings you want, click
[OK
]
to close the Printer Setting dialog box.
6
Start printing from the application's print dialog box.