Getting Started Incoming Logins
3-5
If the MSS encounters a problem with the Ethernet network, it will send an alert message
to the console and wait ten seconds to detect serial port activity before attempting to finish
booting. If you press a key during that time period, the MSS will display the Boot prompt
at which you can enter the Change IPaddress command to set the unit’s IP address.
Note: For more information on Boot Configuration Program (BCP)
commands, see the Troubleshooting appendix.
3.3 Incoming Logins
3.3.1 TCP/IP Logins
3.3.1.1 Web Browser Login and Configuration
If your MSS has an IP address, you can log into it using a standard web browser with Java
enabled. Simply type the MSS IP address or resolvable text name into the browser’s URL/
Location field.
Figure 3-7: Sample Web Browser Login
Once you have connected to the MSS, you will see the Lantronix ThinWeb Manager
interface. Use the left-hand menu to navigate to subpages where you can configure
important settings as well as view statistics and other server information.
Figure 3-8: ThinWeb Manager Interface
MENU
To Next Page
Loading...
Need help?
General