LT-4100 User & Installation Manual Rev 1.00 Unpacking (in-the-box)
Lars Thrane A/S www.thrane.eu Page 3 of 129
Unpacking (in-the-box)
Unpack the LT-4100 Satellite Communications System - Basic (P/N: 90-102608) and check that the following
items are present in the box:
• 51-102663 LT-4110 Control Unit
• 51-100988 LT-3120 Handset
• 51-101181 LT-3121 Cradle
• 51-102365 LT-4130 Antenna Unit
• 91-100771 Bracket Mount, Control Unit
• 91-102118 Power Cable, 3m
• 4 x Stainless steel A4 screws (for Bracket Mount, Control Unit)
• 2 x Stainless steel A4 screws (for Cradle)
• 4 x Unit Test Sheets
• 95-102576 LT-4100 User & Installation Manual
NOTE: Antenna unit mounts (bracket and pole mount) are not included in the LT-4100 Satellite
Communications System - Basic (P/N: 90-102608) and must be ordered separately. The
antenna unit must only be mounted, using the bracket or pole mount, delivered by Lars
Thrane A/S. The antenna unit mounts are listed with part numbers (P/N) in Accessories on
page 4.
Inspection
Inspect the shipping cartons and/or wooden box immediately upon receipt for evidence of damage during
transport. If the shipping material is severely damaged or water stained, request that the carrier's agent is
present when opening the cartons and/or wooden box. Save all box packing material for future use.
After unpacking the system and opening the cartons, inspect it thoroughly for hidden damage and loose
components or fittings. If the contents are incomplete, if there is mechanical damage or defect, or if the
system does not work properly, notify your distributor.
WARNING: To avoid electric shock, do not apply power to the LT-4100 system components if there is
any sign of shipping damage to any part of a unit or the outer cover. Read the Safety
Instructions at the front of this manual before installing or operating the system.
To Next Page
Loading...
Need help?
General
