LT-4100 User & Installation Manual Rev 1.00 Accessories
Lars Thrane A/S www.thrane.eu Page 4 of 129
Accessories
Mounts
The following accessory parts are not part of the basic system and must be ordered separately:
• 91-100772 Flush Mount, Control Unit
• 91-100774 Pole Mount (1.5” pipe, Ø38.8mm), Antenna Unit
• 91-102550 Pole Mount (2.0” pipe, Ø53.0mm), Antenna Unit
Cable and connectors
The following cable and connector parts are not part of the basic system and must be ordered separately:
• 91-100768 Aux Cable, 3m
• 91-101183 Coaxial cable Ø4.9mm, 10m
• 91-101184 Coaxial cable Ø4.9mm, 25m
• 91-101137 Coaxial Cable Ø10.3mm 10m
• 91-101138 Coaxial Cable Ø10.3mm 25m
• 91-101139 Coaxial Cable Ø10.3mm 50m
• 91-101140 N Conn. (male) for Coaxial Cable Ø4.9mm
• 91-101186 N Conn. (male) for Coaxial Cable Ø10.3mm
• 91-101187 Crimping Tool for Coaxial Cable Ø4.9mm
• 91-101188 Crimping Tool for Coaxial Cable Ø10.3mm
Coaxial cables are delivered with one fixed N connector (outdoor mounting), another loose N connector
and crimp parts comes with the cable. It is required to use an appropriate crimping tool for attaching the
loose N connector.
NOTE: For further details on the cable and connectors, please contact Lars Thrane A/S. A coaxial
cable up to a length of 500 meters can be used for connecting the LT-4110 Control Unit and
the LT-4130 Antenna Unit. Details about the coaxial cable, specification, and cable lengths,
are described in LT-4130 Antenna Unit on page 11.
To Next Page
Loading...
Need help?
General
