EasyManuals Logo

Lars Thrane Iridium Certus LT-4100 User Manual

Lars Thrane Iridium Certus LT-4100
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
LT-4100 User & Installation Manual Rev 1.00 Serial Interface (RS-422)
Lars Thrane A/S www.thrane.eu Page 81 of 129
Serial Interface (RS-422)
GNSS sentences
The LT-4100 system supports outputting of GNSS sentences encoded as NMEA 0183 via an RS-422 interface
from the LT-4100 system, as illustrated in Figure 103. The LT-4100 system has a built-in GNSS receiver in
the LT-4130 Antenna Unit.
Table 22 presents the supported GNSS sentences by the LT-4100 system. The configuration of the GNSS
sentences are illustrated and described in GNSS and BAM on page 100.
IMPORTANT: The GNSS receiver of the LT-4100 system is not certified according to IMO performance
standards for GNSS receivers. The LT-4100 system shall not be connected to equipment
where the GNSS receiver interface must be certified.
The GNSS sentences and decoding of these are further documented in App. D GNSS sentences on page 113.
GNSS Sentences
Sentence
Baud Rate
4.800
9.600
38.400
DTM
X
X
X
GGA
X
X
X
GLL
X
X
X
GSA
X
X
X
GSV
-
X
X
RMC
X
X
X
VTG
X
X
X
ZDA
X
X
X
Table 22: GNSS sentences
Figure 103: GNSS sentences

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lars Thrane Iridium Certus LT-4100 and is the answer not in the manual?

Lars Thrane Iridium Certus LT-4100 Specifications

General IconGeneral
BrandLars Thrane
ModelIridium Certus LT-4100
CategoryConference System
LanguageEnglish

Related product manuals