Press a paperclip into the tiny hole on the side of the
unit and release. The unit restarts.
After battery replacement or resetting, the battery
system requires 2 minutes to calibrate itself before
displaying the correct status.
While calibrating, the battery icon toggles between
full and low.
Resetting the VISO
Note: Reset the unit after battery replacement, when troubleshooting and when verify-
ing software version number.
Important Notice about Speed Recordings
Experience has shown that when mounting the VISO on the hand or belly, different
air
pressures induced by hand or body movements may result in incorrect recordings of
speeds.
For more information about using the VISO as a Speed-Meter, see page ?.
Padlock Window
Playback altitude versus time • Playback speed versus time • Padlock Window
Profile Area
Padlock Window
Press or to leave the Profile Area to return to
the Main Window or press to return to the Profile
Area.
To Next Page
Loading...
Need help?
General
