Main Window
This represents the starting point for all further actions and subsequent displays.
Display
The VISO runs a self-test and
displays all icons
It then displays the firmware
version number together with
a factory reference number...
...and switches to a screen
configuration referred to as
the “Main Window”.
Display
Status Area
6 True Airspeed (TAS) / Skydiver’s Airspeed (SAS) status
7 Mph / Kmh status
8 OFF icon - Used to manually power OFF the VISO
9 Speed-Meter indicator when VISO is set to Speed-Meter mode
10 Padlock icon Used to indicate and control entrance to ACCESS mode
11 Feet/Meter status
12 Altimeter indicator when VISO is set to Alti-Meter mode
Power ON
The VISO has been powered OFF prior to shipping from our factory. To turn the
power ON, press and hold any key until the VISO beeps, then release the button.
Auto OFF
The VISO automatically switches OFF 14 hours after the last jump or 14 hours after
the last pressing of any key, whichever comes first.
To Next Page
Loading...
Need help?
General
