13
II. RECOMMENDED CONFIGURATION
1.
Computer
:
Your PC must be sufficient to equip with Window 95 at least.
We recommend the specification of PC for better work as
below:
CPU Pentium at least
DRAM 32 MB RAM or up
FDD One 3.5" 1.44 MB floppy
HDD 1.2 GB Hard Drive or up
SVGA 15" Super VGA Monitor
★ ★On Board Parallel Mode(Setup from PC BIOS):
SPP—Preferred Mode
ECP—Cable length less than 1.8meters
2. Scanner
Flat Bed
Minimum resolution: 200 DPI
3. Software
GCC driver (designed under Window 95 or higher level)
Windows Window 95 or higher
CorelDRAW 7.0 Version or up
Any program that can output HPGL commands
To Next Page
Loading...