Initial Set-Up
Gauge Wheels
3
3-14 XR700 062419 Initial Set-Up
3.11 Gauge Wheels
Verify proper function of all mower deck gauge wheels. The wheels should turn freely
without excessive side-to-side motion, and be free of debris. Clean, adjust, or replace as
necessary.
Check that each wheel swivels freely in the shaft pivot collar, and the bushings are in
good condition. If any wheel does not swivel freely, clean and grease the shaft collar
assembly. Replace the bushings if necessary.
Replace any worn or damaged tires.
3.12 General
Verify that all warning decals are in place, visible and legible.
Verify that all covers and safety devices are properly installed and fastened.
Check that the discharge chute is clear of debris, properly mounted, and in good condi-
tion.
Inspect entire Articulator for loose or entangled parts, debris, obstructions, neglected
tools, or any other possible safety hazards, equipment hazards or projectile hazards.
To Next Page
Loading...
