Lastec D2573 - First 25 Operating Hours; First 50 Operating Hours; Every 50 Operating Hours; Every 100 Operating Hours

Maintenance
First 25 Operating Hours
Maintenance 9/27/19 5-2
5
 Verify that all brake cables and hardware are functional, securely fastened and in
good condition.
 Verify proper installation, operation, and unobstructed flow of grass chute.
 Inspect entire Articulator for loose or entangled parts, debris, obstructions, mis-
placed tools, or any other possible safety hazards, equipment hazards or projectile
hazards. Clean off decks of any dirt, grease, or oil.
 Depending on current cutting conditions, brush out and clean the radiators and
hood grills periodically during the day to ensure proper flow of cooling air.
5.3 First 25 Operating Hours
 Change the hydraulic oil and filter.
5.4 First 50 Operating Hours
 Change engine oil and filter.
1
5.5 Every 50 Operating Hours
 Grease all blade spindle bearing housings. Fill until grease purges from weep hole
in bearing housing.
 Inspect all bushings for wear. Replace as needed.
5.6 Every 100 Operating Hours
 Inspect engine fuel lines and clamps. Replace as needed.
1
 Inspect air cleaner and filter elements. Replace as needed.
1
 Inspect engine fan and alternator belt. Replace as needed.
5.7 Every 200 Operating Hours
 Change engine oil and filter.
1
1. Refer to the Engine Operator’s Manual accompanying this manual.