Maintenance
Urethane Bushings
Maintenance 9/27/19 5-6
5
times. Failure to keep these spacers tight will result in premature wear on the bolts, and
equipment damage.
Ensure that ALL bolts associated
with urethane bushings are tight
at all times.
In some cases, urethane bush-
ing applications are associated
with grease points. The grease,
in these cases, is used to protect
the moving parts from corrosion
due to water or other contami-
nants, and is not used for friction
reduction. Ensure grease fills the
cavity to prevent infiltration.
To Next Page
Loading...
