10 • PayClock Online
Changing settings at the Clock
The default settings that can be changed by the administrator at the
clock or the PayClock Online software are:
• Time Zone: The time zone is set to Eastern Time.
• Daylight Savings Time: Daylight savings is turned on.
• Time Format: The display will show the hours in a 12-hour
(AM/PM) format.
The default settings that can only be changed through the PayClock
Online software are:
• PIN Entry: PIN entry is turn on.
• Badge Entry: Badge entry is turned on.
• Allow Amounts: Amount entry is turned on.
• Maximum days to store registrations on clock: Is set to 90
days.
• Send Date/Time on poll or update: Is turned on.
• Send worked hours and benefit time after poll: Is turned on.
How do I change the time zone?
• From the clock touchpad press the Admin button. Enter the
administrator password (PIN) and press the Enter button.
• The Administrator Main Menu screen will display.
• Press Date/Time Setup. The Date Setup screen will display.
• Press the Time Zone button. The Choose Time Zone screen
will display.
• Using the up and down arrow keys select the desired time
zone and click OK.
• When finished press the back button until you have
returned to the default screen.
To Next Page
Loading...
