Using the PC700 Series Clock • 17
• When the badge is in close to the clock a confirmation beep
will sound, and the list of available departments will display.
• Press the button for the desired department. A confirmation
screen will display showing the showing the department into
which the employee transferred.
Amount Entries
• Press the Enter Amounts button on the touch-pad of the
clock.
• Move the badge over the badge reader symbol below the
illuminated oval target area on the front of the clock.
• When the badge is in close to the clock a confirmation beep
will sound. The Enter Amt. screen will display.
• Using the numeric key pad enter the value for the amount
and press Enter. A confirmation screen will display showing
the showing the amount entered for the employee.
Viewing Totals
• Press the View Totals button on the touch-pad of the clock.
• Move the badge over the badge reader symbol below the
illuminated oval target area on the front of the clock.
• When the badge is in close to the clock, a confirmation beep
will sound, and the employee’s grand totals for the pay
period and any benefit time will display.
Employee Transactions using a PIN
Employees can record transactions or view total information by using
the touch-panel on the clock.
Clocking IN/Out
• Press the Clock In/Out button on the touch-pad of the clock.
• The Enter PIN screen will display. Using the numeric key
pad enter the employee’s PIN number and press Enter.
To Next Page
Loading...
