Lathem PC700 - Page 46

42 • Appendix D - Add/Edit/Delete Bell Events
Editing a Bell Event
• From the PC700 touchpad press the Admin button. Enter the
administrator PIN and press Enter.
• From the Administrator Main Menu press Relay Settings.
• The Relay Settings screen will display.
• Press Schedule under Signal Events. The Signal Event
Schedule screen will display with all the schedule events.
• Select the desired Event. The Edit Event screen will display.
• Make the needed changes for the event.
• Press OK to save the changes. The edited programmed
event will display in the list.
• When finished press the back  button until you have
returned to the home screen.
Deleting a Bell Event
• From the PC700 touchpad press the Admin button. Enter the
administrator PIN and press Enter.
• From the Administrator Main Menu press Relay Settings.
• The Relay Settings screen will display.
• Press Schedule under Signal Events. The Signal Event
Schedule screen will display with all the schedule events.
• Select the desired Event. The Edit Event screen will display.
• Press the Delete Event button. Press Yes at the confirmation
message.
• The programmed event will be removed from the list.
• When finished press the back  button until you have
returned to the home screen.