Integral T process thermostats
21/01/2019 / YAWE 0026 Starting up 41
Press the key to go to programme selection.
Press the keys to go to the programmes P 1, P 2 –. P 5,
or backwards.
Key starts the programme. Display changes to basic
menu (level 0) and shows e. g. P 1 (instead of SET). P 1
blinks briefly; this indicates that the programme is
running. On selecting a programme number which has
not been configured with a programme, the basic menu
shows SET.
7.6.3.4 Terminate, pause, continue the programme
Ongoing into the PGM menu while a programme is
running, the display shows STOP and the programme
number.
To Next Page
Loading...
