Lauda Integral T 4600 - 7.7.5 Error messages

Integral T process thermostats
82 Starting up YAWE 0026 / 21/01/2019
7.7.5 Error messages
Message
Explanation
ERR_2
Wrong input (e.g. buffer overflow).
ERR_3
Wrong command.
ERR_5
Syntax error in value.
ERR_6
Illegal value.
ERR_8
Channel (ext. temperature) not available.
ERR_30
Programmer, all segments occupied.
ERR_31
Setpoint not possible, analogue setpoint input ON.
ERR_32
TiH  TiL.
ERR_33
No external sensor.
ERR_34
Current below 4 mA.
ERR_35
Auto is selected.
ERR_36
No setpoint input possible. Programmer is running or is paused.
ERR_37
No start from programmer possible, analogue setpoint input is switched on.
ERR_50
Communication between thermostat and remote control FBT is interrupted.
7.7.6 Driver software for LABVIEW
®
An individual, easy-to-use control and automation software for operating the ECO, ECOLINE,
INTEGRAL XT, INTEGRAL T and WK/WKL units can be programmed with the aid of the National
Instruments program development tool LABVIEW
®
(http://sine.ni.com/apps/we/nioc.vp?cid=1381&lang=US).
In order to make program operation possible on the RS 232/ RS 485 interface, LAUDA provides drivers
specially designed for LABVIEW
®
which can be downloaded free of charge under www.lauda.de.