Lauda INTEGRAL XT - 4. Installation; 4.1 Unpacking; 4.2 Contents of package

Flow controller MID 20
11
4. Installation
Note
Falling down / tipping over of the device
Damage to property
- Only place the device upright and on a level surface.
- Do not tilt the device.
4.1 Unpacking
Unpacking procedure
1. Open the package at the top.
2. Keep the original packaging of your device for later storage or transport.
3. Inspect the device and the accessories immediately after unpacking for completeness and
transport damage.
4. If there is unexpected damage to the device or accessories, inform the carrier immediately
so that a damage report is produced and a check of the transport damage can be made by the
LAUDA service department ( chapter 8.2).
4.2 Contents of package
Figure
(not to scale)
Designation
Quantity
Flow controller
1
No figure
Declaration of clearance for service or repair jobs.
1