12
4.3 Recommended accessories
(Not included in the scope of delivery)
Connecting cable 2.5 m with 2 Lemo connectors
If you have questions about accessories you can contact our LAUDA service department (
chapter 8) or visit our website lauda.de. Under the tab “Product solutions/temperature control
devices/accessories” you will find a wide selection of different accessories including connecting
materials.
4.4 Placement
Observe the minimum clearance on all sides and do not
cover the ventilation openings.
The device may not be operated if its temperature has
dropped below the dew point during transport or storage.
We recommend that the devices by placed as described. Other placement options are possible, but
the type of heat dissipation of the Integral XT, the temperature change if bridging paths are too long
and the ambient conditions of the placement location(s) must be taken into account.
1. Select a suitable location for the devices.
2. Position the flow meter on the right-hand side of the Integral
XT.
3. Ideally, the application is to the right of the flow meter.
To Next Page
Loading...