Lauda INTEGRAL XT - 4.5 Connecting device components

To Next Page

To Previous Page

Flow controller MID 20

4.5 Connecting device components

Caution!

Use unsuitable connecting materials

Material damage and injuries

 Note the requirements that the expected temperature and

pressure ranges place on the hose material.

 Only use hose material that is suitable for the chemical

makeup of the heat transfer liquid.

 Note the requirements that the expected temperature range

places on the insulation of the connecting hoses and

connection elements.

Note

Contamination/damage to the connections or the piping

Damage to property

 Before connecting, ensure that the connections are clean

and free of foreign objects.

 When connecting the hoses to the connectors, use a second

spanner to counter the tightening torque.

 Ensure that the nipple does not turn when tightening.

 Do not tighten the connections more tightly than is

necessary.

Note

Consumer overflow

Damage to property/contamination

 Only connect closed consumers.