LAUNCH TECH X-431 PAD V - Page 28

LAUNCH X-431 PAD V User's Manual
23
Fig. 5-20
*Note: Diagnostic report is classified into three categories: Pre-Repair
report, Post-Repair report and Diagnosc Scan. No maer which type you
saved the report as, the report type will be appended as a tag on the upper
right corner of the diagnosc report for easier idencaon.
Tap to select the report type from the option list and input the
required information, and then tap “OK”.
Note: To facilitate the comparison of the pre-repair and post-repair reports
and get accurate test result, please make sure you saved the right type of
the diagnosc report.
To save the report as a common diagnosc report, select “Diagnosc Scan”.
Fig. 5-21
Enter the technician and customer name and then tap “OK” to conrm
and navigate to the report details page.
*Note: For workshop informaon, tap “Change” to revise it. Alternavely
you can also set it in “User Info” -> “Sengs” -> “Print Informaon”.
Once you configured the information, it will be automatically generated
every time you saved the diagnostic report. All vehicle and workshop
informaon will be appended as tags on the diagnosc report.
To ignore the workshop information, tap “Skip” to go to the report
details page.
On the report details page, tap “Save” to save it. All diagnostic reports
can be accessed from “User Info” -> “My Reports” -> “Diagnostic
Report”.
Help: Tap to view the help information of the selected DTC item.