LAUNCH 629 User's Manual
36
www.x431.com +86 755 8455 7891
Note: After the system identified the scanner information, it will display in
gray in Product Serial Number input box and the "Print Manager" module will
be activated immediately.
4. Click [Print Manager] to enter the print manager screen.
Figure 6-3
4. Select [PRINT] from the main menu screen on the OBD II scanner and
press [OK] to enter the diagnostic record list screen. Select the desired one
record and press [OK].
5. The print manager will synchronize all reports from the scanner and display
the records on the computer.
To Next Page
Loading...
