17
LAUNCH
6. Register & Update
Hardware Requirement:
1. A computer that can access the Internet.
2. A memory card reader/writer and a memory card are required.
There are 2 methods available: via memory card or via USB cable.
Method 1: Via Memory Card
1. Go to http://www.cnlaunch.com to download the corresponding update tool.
2. Install the update tool and launch the program when installed.
3. Type in the Serial Number (located at the back of the tool).
4. After the Serial Number is entered, click [Device Upgrade] and enter the
following information. Click [Submit].
(If you need the Register Code, proceed to the steps 5-8)
(If you have the Register Code, proceed to step 9 directly)
5. The Register Code can be found by connecting the supplied USB cable to the
tool and inserted into the computer.
6. When the tool has powered up, place cursor on the Help icon and press the
[OK] button.
To Next Page
Loading...
