19
LAUNCH
10.Reopen the update tool and select the updates you would like to perform or
click [Select All] and click [Download].
11. Once all steps are complete, reinsert the memory card into the tool and power
the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt
you to upgrade, click [OK] to start updating and a progress bar will appear. It
may take several minutes to nish update if your upgrade package le is too
large, please wait.
12.The registration process is now complete!
Method 2: Via USB Cable
Note: Make sure the PC has an Internet connection.
1. Connect one end of the USB cable to the USB port of PC, and the other end
to the tool.
2. If a newer version is found, the following screen will appear.
To Next Page
Loading...
