16
Operation with the N4PY Rig Control Software
N4PY publishes rig control software that is compatible with the AT-200PC
2
. Operation with this
software is shown here as an example of this class of program. To use the software with the tuner,
you will connect your rig to your PC via one serial port (COM1 for example), and the tuner to a
second serial port (COM2 for example). After launching the software, select the Settings menu,
then go to the Preferences 3 menu. Check the box labeled "Using LDG AT-200PC Autotuner",
and select the appropriate COM port from the list.
2
This information is provided as a convenience to our users. LDG does not provide support for the N4PY
or other third-party software.
To Next Page
Loading...
