11
Mobile Operation
Your AT-7000 is perfectly suited to mobile operation. You can install it under the dash along
with your transceiver, or remotely in the trunk if you are using the IC-7000’s remote head
capability.
To install the unit under the dash, you can "homebrew" a bracket (LDG does not provide one).
You can also use Velcro tape, although the adhesive tends to soften in hot weather. In the trunk,
Velcro works well to secure the units together, and to the trunk floor. Simply run the coax jumper
from your transceiver to the tuner, run a DC line to the tuner and connect your mobile antenna.
Press the TUNER/CALL button on the radio, and the tuner will operate as usual. Be sure to use a
fused power line to the radio.
MARS/CAP Coverage
Your AT-7000 provides tuning continuously over its specified range, not just in the ham bands.
This makes it useful for MARS or CAP operation, or any other legal HF operation.
To Next Page
Loading...
Need help?
General
