8
Operating Hints
Transceiver Tuner Status Indication
Different models of ICOM transceivers indicate the status of the external tuner with slight
variation. Most will show a graphical or textual icon on the screen to indicate that the tuner
is active and has properly tuned. For example, the IC-7000 displays a blinking icon
while tuning, and a solid icon when tuning is complete. This icon disappears when
the tuner is bypassed, and blinks if a tuning cycle failed to find a good match. Other ICOM
transceivers behave similarly. Consult your transceiver operating manual’s external tuner
section for more information. When in doubt key the radio in AM and press the Tune button
on the LDG tuner.
Radio Interface Cables
There are a variety of three foot interface cables available.
- Press Button on Tuner or Radio
o IC-100 ICOM AH-3 or AH-4 Compatible
- Press Button on Tuner
o IC-105 ALINCO EDX-2 Compatible, DX-70, DX-77
o IC-108 YAESU FT-100, 857, 897, 891, 991
o IC-109 YAESU FT-450, 950, 1200, FTdx10
o IC-115 YAESU FTdx101, 3000
- Key Radio and Press Button on Tuner
o IC-105 ALINCO SR8T, SR9T
o IC-106 KENWOOD AT-300 Compatible
- Power Only
o IC-104 Power, Ground, Key, Start
To Next Page
Loading...
Need help?
General
