Need help?Do you have a question about the Leb Electronics CTR57 and is the answer not in the manual?
Details the inputs connected to the unit, such as push-buttons for gate control.
Explains inputs for safety devices like photo-cells that detect obstacles.
Describes the outputs controlling devices like blinkers and motors for gate wings.
Details the power supply connections for the board and accessories.
Covers inputs for accessories like radio aerials.
Explains the function of indicator LEDs, such as programming and photocell status.
Details the trimmer RV1 used for adjusting the slow-down speed.
Explains the function of jumper JP1 for battery charger selection (12Vdc/24Vdc).
Describes the function of programming keys P1, P2, and P3 for setup.
Details the purpose of protection fuses F1 (battery) and F2 (services).
Provides key technical specifications like power supply, radioreceiver, and work time.
Outlines the main operation phases and functional modes of the gate automation.
Explains how to add and manage remote control codes for the system.
Provides instructions on how to clear all learned remote control codes.
Details methods for setting motor work times, including automatic and manual settings.
Describes the different operational logics like step-by-step, automatic, and condominium modes.
A concise guide for initial installation and basic operation setup.
Details the inputs connected to the unit, such as push-buttons for gate control.
Explains inputs for safety devices like photo-cells that detect obstacles.
Describes the outputs controlling devices like blinkers and motors for gate wings.
Details the power supply connections for the board and accessories.
Covers inputs for accessories like radio aerials.
Explains the function of indicator LEDs, such as programming and photocell status.
Details the trimmer RV1 used for adjusting the slow-down speed.
Explains the function of jumper JP1 for battery charger selection (12Vdc/24Vdc).
Describes the function of programming keys P1, P2, and P3 for setup.
Details the purpose of protection fuses F1 (battery) and F2 (services).
Provides key technical specifications like power supply, radioreceiver, and work time.
Outlines the main operation phases and functional modes of the gate automation.
Explains how to add and manage remote control codes for the system.
Provides instructions on how to clear all learned remote control codes.
Details methods for setting motor work times, including automatic and manual settings.
Describes the different operational logics like step-by-step, automatic, and condominium modes.
A concise guide for initial installation and basic operation setup.
General| Brand | Leb Electronics |
|---|---|
| Model | CTR57 |
| Category | Computer Hardware |
| Language | English |
To Next Page