Maintenance
6. Maintenance 6-1
6.1 Introduction 6-1
6.1.1 Safety Precautions 6-1
6.1.2 Anti-static Precautions 6-1
6.2 Disassembly and Assembly Procedure 6-2
6.2.1 Disassembly Procedure 6-2
a. Removal of the Upper Cover Assembly 6-2
b. Opening of the Front Bezel 6-2
c. Removal of the Acquisition System Assembly 6-3
d. Removal of the PCI Board 6-4
e. Removal of the AGP-DVO Interface Board 6-4
f. Removal of the Processor Board 6-4
g. Removal of the Hard Disk Drive 6-5
h. Removal of the CD ROM Drive 6-5
i. Removal of the Power Supply 6-6
j. Removal of the Front Frame Assembly 6-6
k. Removal of the Front Panel Encoder Board 6-7
l. Removal of the USB Hub Board 6-7
m. Removal of the Display Inverter Board 6-8
n. Removal of the Display and Touchscreen 6-8
o. Replacing the Battery 6-9
Assembly Procedure 6-10
6.2.2 Installing Hardware Options 6-11
6.3 Software Update Procedure 6-11
6.3.1 Installing New X-Stream DSO Application Software 6-11
6.3.2 Software End User License Agreement 6-12
6.3.3 Installing Device Drivers 6-17
6.3.4 Upgrading Microcode 6-18
6.3.5 Verifying Microcode 6-19
6.3.6 Restoring the Operating System 6-19
6.3.7 Software Options 6-21
6.3.7.1 Changing Software Option Key 6-21
a. Scope ID, Scope Serial Number 6-21
b. Entering Option Key in the DSO 6-21
6.4 Board Exchange Procedure 6-22
6.4.1 Processor Board Exchange Procedure 6-22
6.4.2 Hard Drive Replacement Procedure 6-22
6.5 Equipment and Spare Parts Recommended for Service 6-23
6.5.1 Test Equipment Required 6-23
6.5.2 WaveRunner Spare Parts 6-23
6.6 Service Menu 6-24
6.6.1 Accessing Service Menu 6-24
6.6.2 Mainframe Tests 6-25
6.6.2.1 Front Panel Test 6-25
6.6.2.2 Critical File Backup 6-27
6.6.3 Acquisition System Tests 6-28
6.6.3.1 Critical Acquisition System Component Temperatures 6-28
Table of Contents v
To Next Page
Loading...
