Lectra Alys 30 - 3.8 Removal;replacement of anti-static brushes, Y carriage; 3.8.1 Removal; 3.8.2 Replacement; 3.9 Replacement of the plotting block

 (MWQERXPMRKSJTVMRXMRKFPSGOTEVXW
%P]WQEMRXIRERGIQERYEP %%
 6IQSZEPVITPEGIQIRXSJERXMWXEXMGFVYWLIW=GEVVMEKI
 6IQSZEP
The plotting block must be removed, to reach the fastening screws of the
anti-static brushes.
 6ITPEGIQIRX
Reposition the anti-static brushes on the plotting block support and screw in
the four fastening screws lightly.
 6ITPEGIQIRXSJXLITPSXXMRKFPSGO
Position the plotting block with care for the guide studs.
9RWGVI[XLIX[SJEWXIRMRKWGVI[WSJIEGLERXM
WXEXMGFVYWLERHVIQSZIXLIQ