Lectra Alys 30 - Page 66

 %HNYWXQIRXSJFIPXXIRWMSR
%P]WQEMRXIRERGIQERYEP %%
To measure the tension of the belt, take into account the mark made on the
1000mm belt.
Tighten the belt with the aid of the tightening nut, until the mark moves to
1004mm from the reference point (for a new belt), or 1003mm for a belt being
repositioned. Tighten all the screws and locking nuts of the elements needed
for belt tension. Check that the Y tightener is perpendicular to the Y
mounting
0SSWIRSVXMKLXIRXLI
VIXIRXMSRWGVI[JSVXLIFIPX
EHNYWXQIRXYRXMPXLI
TVIWGVMFIHEHNYWXQIRXEW
;LIRXLIEHNYWXQIRXMW
GSVVIGXFPSGOXLI
EHNYWXQIRXWGVI[[MXLXLI
FPSGOMRKRYX
*MRMWLXLIEHNYWXQIRXF]
FPSGOMRKXLIFIPXXMKLXIRIV
[MXLXLIJSYVWEJIX]FSPXW
TVSZMHIH
1EVOTSWMXMSR[MXLXLIFIPX
MRTSWMXMSRFYXRSXXMKLXIRIH
6IJIVIRGIQEVOTSWMXMSR
4SWMXMSRS
J
X
L
IQEV
O
E
J
XIV
XMKLXIRMRKXLIFIPX