EasyManuals Logo

Leeson SPEEDMASTER SM2 Series User Manual

Leeson SPEEDMASTER SM2 Series
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
21
Commissioning
4.3 Parameter setting
Status/fault messages Change Parameters
StoP
60.0
F.AF
F.UF
CL
Err
p100
p104
p541
60 s
P194 = 0000
PASS
0225
M
M
15 s
M
M
20.0
12.0
V0106
4.4 Electronic programming module (EPM)
Tmd007
The EPM contains the drive’s operational memory. Parameter settings are stored in
the EPM and setting changes are made to the “User settings” in the EPM.
An optional EPM Programmer (model EEPM1RA) is available that allows:
An EPM to be copied directly to another EPM.
An EPM to be copied to the memory of the EPM Programmer.
Stored les can be modied in the EPM Programmer.
Stored les can be copied to another EPM.
As the EPM Programmer is battery operated, parameter settings can be copied
to an EPM and inserted into a drive without power being applied to the drive. This
means that the drive will be fully operational with the new settings on the next
application of power.
Additionally, when the drive’s parameter settings are burned into an EPM with
the EPM Programmer, the settings are saved in two distinct locations: the “User
settings” and the “OEM default settings”. While the User settings can be modied
in the drive, the OEM settings cannot. Thus, the drive can be reset not only to the
“factory” drive default settings (shown in this manual), but can be set to the Original
Machine settings as programmed by the OEM.
While the EPM can be removed for copying or to use in another drive, it must be
installed for the drive to operate (a missing EPM will trigger an
F.F1 fault).
CALL NOW 800-985-6929
http://www.automatedpt.com
Email: charles@automatedpt.com
CALL NOW 800-985-6929
http://www.automatedpt.com
Email: charles@automatedpt.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Leeson SPEEDMASTER SM2 Series and is the answer not in the manual?

Leeson SPEEDMASTER SM2 Series Specifications

General IconGeneral
BrandLeeson
ModelSPEEDMASTER SM2 Series
CategoryDC Drives
LanguageEnglish

Related product manuals