20
Please use this chart to troubleshoot common problems using robot.
6.Troubleshooting
NO Malfunction Possible Causes Solutions
01
02
Can not
connect to
WIFI.
The robot
is too noisy.
Incorrect WIFI name or Password.
Make sure the robot is less than
Robot isn't in network pairing mode.
Download the incorrect APP
Side brush, rolling brush,entangled,
dustbin Filter material blocked, etc.
The robot is in MAX suction
power mode.
Change the suction power mode to Medium or Low.
5 feet(0.5 meter)away from the
router and your phone - the
closer the better!
Please make sure the WIFI name and the
Ensure the robot is under WIFI signal coverage.
password are entered correctly.
Make sure the robot is in the network pairing mode.
Didn't connect to 2.4G Wi-Fi signal.
The robot doesn't connect compatible with 5G WiFi
signal, Please connect to 2.4G WiFi signal.
Please scan the QR code in the user manual or
search "Lefant life" on google play or app store.
It is recommended to clean and maintain the
brush, roller brush,dustbin and filters regularly.
5.Indicator Light
Robot States AUTO Display Status WiFi Display Status
Charging
When the Robot Fails
Red light flashes or Glows a
continuous RED
Glows a continuous BLUE
Exit the network pairing mode after 3
minutes, the blue light is off
Blue light flashes
network pairing process/
WiFi connection was lost
Before starting network pairing
Cleaning Mode Glows a continuous BLUE
Glows a continuous BLUE
Glows a continuous BLUE
Glows a continuous BLUE
Low Battery
Connect to Wi-Fi
Glows a continuous RED
Finished Charging Blue lights goes off
pink light/blue light breathing
As per current networking status
As per current networking status
As per current networking status
As per current networking status
As per current networking status
To Next Page
Loading...
