Connect the sensor or motor you would like to test to
the NXT - the View submenu will help you select the
right port or check standard settings on page 17.
Select View on the NXT’s display.
The View submenu lets you carry out a quick test of your
sensors and motors, observing real-time data from each
unit.
Select the icon of the sensor or motor
you would like to test. You can only get
readings from one sensor or motor at
a time.
Select the port that the sensor or mo-
tor is attached to.
The data from the sensor or motor will
appear on the display.
New Eik New Eik
To Next Page
Loading...
