LEGO Mindstorms User Manual

 


 




Select the Bluetooth submenu
on the NXT’s display.
Select the Search icon to search for
other Bluetooth devices. Your NXT will
automatically search for Bluetooth
devices.
Depending on how many devices are
detected in the area, a list will pop up on
the NXT’s display after a few seconds.
Select the device you want to connect to.
Remember that you can give each NXT a
unique name
– see Naming the NXT on page 21.
Select which of the three lines of communication you want the connection to
be on (1, 2 or 3). You can connect your NXT to three different devices at the
same time.
If you connect to a device for the rst time, your NXT will ask for
a passkey. Just press enter to use the default passkey 1234 or
make up your own code. The other Bluetooth device must know
your passkey in order to conrm the connection. This means
that the two NXTs need to to enter the same passkey in order to
connect.
If you want to connect your NXT to more than one Bluetooth
device, go to the My Contacts submenu to select a trusted contact
or start a new search.

LEGO Mindstorms Specifications

General

Name	LEGO Mindstorms
Category	Toy
Type	Robotics Kit
Brand	LEGO
Age Range	10+
Programmable Brick	Yes
Sensors	Ultrasonic, Color, Touch, Gyro
Motors	Servo Motors
Connectivity	Bluetooth, USB
Programming Language	Scratch, Python
Pieces	Varies by set
Batteries Required	Yes
Compatibility	LEGO Technic
Sensors Included	Varies by set (Touch, Color, Ultrasonic, Gyro, IR)
Motors Included	Varies by set (Large and Medium)