Here you can nd building and programming instructions for four cool models.
Access www.MINDSTORMS.com to get new models, programs, sounds, images, tips, and tricks and be
part of the great MINDSTORMS community.
The tool bar provides additional tools enabling you to calibrate sensors, create custom sounds and im-
ages for the NXT or create NXT les to share with other MINDSTORMS users.
This is the space on the screen where programming takes place. Drag programming blocks from the
programming palette to the work area and attach the blocks to the sequence beam.
Provides tips and help for the specic function you are using at the moment.
Use the Work area map to get an overview of your program. Click on the Work area map and drag it over
the part of your program you want to see.
The programming palette contains all of the programming blocks you will need to create your
programs. The tabs at the bottom of the palette let you switch between the common palette (containing
the most frequently used blocks), the complete palette (containing all of the blocks), and the custom
palette (containing blocks that you download or create yourself).
Each programming block has a conguration panel that lets you customize the block for the specic
input and output that you want.
The Controller allows you to communicate with your NXT. Transfer programs and les, start and stop
programs or change the settings of your NXT.
This pop-up window will give you information about your NXT’s memory and communications settings.
1
2
3
4
5
6
7
8
9
10
To Next Page
Loading...
Need help?
General
