FEATURES
SCS BUS TECHNOLOGY
TECHNOLOGY:
The devices are connected in parallel with a non polarized
twisted-pair cable for sending information and with low
voltage (27V dc) electrical power.
Twisted-pair BUS cable
TYPE OF DEVICES:
Command devices connected to the BUS cable
Actuators connected to the BUS cable and also to the power
cable for load management.
FUNCTIONS:
- Shutters and light automation
- Scenarios
- Burglar alarm
- Technical alarm (detection of gas and water)
- Energy management
- Sound management
- Video door and home video monitoring
- Indoor and outdoor control of integrated functions
- Expansion opportunities with ZigBee devices
- Integration with Konnex protocol based systems.
CONFIGURATION OF THE DEVICES:
Simplified configuration with jumpers which can used to
configure presets or actions which can be identified on each
accessory
Configuration through a special software (virtual configurator)
that enables to configure off-line the system (lighting and
shutters automation).
WHEN TO USE IT?
- especially suitable for new installations in medium and large building;
- To create fully networked solutions by integration different applications from comfort, safety or energy saving functions up
to door entry systems, management of multimedia contents or remote supervision and control.
To Next Page
Loading...
