SCS BUS
BUS CONTROLS
DIN ACTUATORS
Power supply
Basic control 4 scenario control
1 relay DIN
actuator 16 A
2 relays DIN
actuator 10 A
DIN dimmer
1000 W
The BUS system can be used to perform various home
automation functions for:
• ENERGY CONTROL;
• SAFETY;
• COMMUNICATION;
• COMFORT.
COMPLETE HOME AUTOMATION SOLUTIONS CHARACTERISTICS
The BUS systems, intended for new large installations, are made
using a twisted pair, which connects the command and control
devices to the actuators. The control devices are installed inside
appropriate wall boxes. The actuators are installed inside the
electric distribution board, junction boxes, or in direct proximity
of the load. Control devices must be connected to the SCS BUS
and to power cable for load managed.
To Next Page
Loading...
