The single
functions
The automation system is used to control lights, rolling shutters, swing
doors and irrigation, etc. in a simple and logic way.
Light Control Rolling shutter control
AUTOMATION SYSTEM
Thanks to the automation system, scenarios can be created
and controlled.
Using the scenarios, one single pushbutton can be used to
control several devices (lights, rolling shutters) within the
automation system, and to control the other systems.
With the automation system, devices can also be controlled
using the remote control.
The system may also be interfaced with the ZigBee® radio
system, or with other traditional controls.
IR receiver
Advanced IR and RF
remote control
SCS/Zigbee
®
gateway
Radio switch control
SCS BUS
To Next Page
Loading...
