61
DAKER DK Plus
1 kVA - 2 kVA - 3 kVA
Installation manual
3 101 70 3 101 71 3 101 72
Unitary capacity 12 Vdc - 7.2 Ah 12 Vdc - 7.2 Ah 12 Vdc - 9 Ah
Rated Battery Voltage 36 Vdc 72 Vdc 72 Vdc
Backup time with 50%
linear load
> 10 min > 10 min > 8 min
Battery extension Yes
Maximum charge current 2.1 Adc 1.5 Adc 1.5 Adc
Recharge time (to 90%) 4 hours
Communication and management
Screen and signalling
six pushbuttons and four LEDs for real-time control of the status
and the main parameters of the UPS
Communications ports
RS232 and USB
Connector for network interface
Software
Software for Windows and Linux environments is available in order to:
- displaying all the functioning and diagnostic data in case of problems;
- setup of special functions.
Download a copy free of charge from the website
http://www.ups.legrand.com
Protections
Electronic circuits against overloads and short-circuit
Backfeed
Emergency Power O (EPO)
Overtemperature
Mechanical characteristics
Dimensions W x H x D (mm) 440 x 88 (2U) x 405 440 x 88 (2U) x 600
Net weight (kg) 16 29,5 30
Environmental conditions
Operating temperature
0 ºC to +40 ºC
+32 ºF to +104 ºF
Operating relative humidity 20% to 80% (non-condensing)
Storage temperature
0 ºC to +50 ºC
+32 ºF to +122 ºF
Noise level at 1 m < 50 dB
IP code IP 21
Heat dissipation (BTU/h) 490 654 818
Reference directive and standards
Safety
2014/35/EU Directive
EN 62040-1
EMC
2014/30/EU Directive
EN 62040-2
Performance and test
requirements
EN 62040-3
To Next Page
Loading...
Need help?
General