LEGRAND DPX3 160 - C - Auxiliary Circuits

_____________________________________________________________________________________________________
38
EN
C – AUXILIARY CIRCUITS
Your capacitor bank is guaranteed to work if the following equipment is connected:
 Current transformer (CT)
 Generator load shedding
(1)
 Safety kit
(2)(3)
The ancillary equipment is connected to a set of terminal blocks:
Safety kit
Generator set
Current transformer
Characteristics
NC contact
Power: 600 VA max.
Terminal for load-
shedding contact
Consumption: 10.5 W
Current input: 1 A or 5 A
Power: 10 VA min.
Class 1
Cable cross-
section
2.5 mm²
2.5 mm²
2.5 mm² to 6 mm²
Terminals
X1/X2
G/E
S1/S2
(1)
When there is a generator on the internal supply.
(2)
Not included in 770 mm high enclosures without reactors, in version with circuit breaker with power ≤ 125 kVAr, in version
without circuit breaker with power ≤ 150 kVAr.
(3)
Please refer to page 31 for more information.